web analytics

Which configuration change(s) is/are needed to bring the S7 FastEthernet 0/2 interface into the up/up state?

 Free Free Download The Exam Relevant Study Guide

Send Via Email (Need Reachable Email ID)

This show output is from the S7 Cisco Metro Switch and the PE7 Cisco ASR 9000 Series Router. Which configuration change(s) is/are needed to bring the S7 FastEthernet 0/2 interface into the up/up state?
S7#show cdp neighbors Device ID Local Intrfce Holdtme Capability Platform Port IDPE7 Fas 0/2 163 R ASR9K Ser Gig 0/0/0/0S78 Fas 0/23 146 S I ME- 3400E- Fas 0/21S8 Fas 0/21 178 S I ME-3400E- Fas 0/21 *Mar 20 21:28:02.177:
%ETHCNTR-3-HALF_DUX_COLLISION_EXCEED_THRESHOLD: Collisions at FastEthernet0/2 exceed threshold. Considered as loop-back.*Mar 20 21:28:02.177: %PM-4-ERR_DISABLE:
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down S7#show interface fa0/2FastEthernet0/2 is down, line protocol is down (err-disabled) Hardware is Fast Ethernet, address is e8ba.70b5.6c04 (bia e8ba.70b5.6c04) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 10Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:40, output 00:00:00, output hang never Last clearing of “show interface” counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy:
Interface state transitions: 4 Hardware is GigabitEthernet, address is 4055.392f.40a8 (bia 4055.392f.40a8) Internet address is 192.168.107.70/24 MTU 1514 bytes, BW 100000 Kbit (Max:
A. Enable loopback line on the S7 Fa0/2 interface then shut and no shut the Fa0/2 interface.
B. Enable duplex half on the PE7 Gi0/0/0/0 interface then shut and no shut the Fa0/2 interface on S7.
C. Change S7 Fa0/2 interface to duplex full and speed 100 then shut and no shut the Fa0/2 interface.
D. Just need to no shut the Fa0/2 interface on S7.
E. Just need to shut and no shut the Fa0/2 interface on S7.
Correct Answer: C

 Free Free Download The Exam Relevant Study Guide

Send Via Email (Need Reachable Email ID)