web analytics

What should be done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server?

An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator noticed that only one of the EtherChannel links is being utilized to

What is the result of the implemented command?

Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 – 8, 39, 52 What is the

What would cause the output to show only the single neighbor?

A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it

Which vendor-neutral protocol could be used to resolve this issue?

After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral

What must be done to fix this?

Several new switches have been added to the existing network as VTP clients. All of the new switches have been configured with the same VTP domain, password, and version. However,

What should be configured for extended VLANs?

After implementing VTP, the extended VLANs are not being propagated to other VTP switches. What should be configured for extended VLANs? A. VTP does not support extended VLANs and should

After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once “blocking” are now defined as “alternate” and “backup.” What is the reason for this change?

After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once “blocking” are now defined as “alternate” and “backup.” What is the

What is the reason for this?

An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should. What is the reason

Which technique automatically limits VLAN traffic to only the switches that require it?

Which technique automatically limits VLAN traffic to only the switches that require it? A. access lists B. DTP in nonegotiate C. VTP pruning D. PBR Answer: C

What effect does the mac address-table aging-time 180 command have on the MAC addresstable?

What effect does the mac address-table aging-time 180 command have on the MAC addresstable? A. This is how long a dynamic MAC address will remain in the CAM table. B.

What solution allows the network switch to automatically recover from such an issue?

While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link

What is the root cause of this issue?

A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the

What is a cause for this issue?

An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network administrator notices that not all traffic is being replicated to the

Which option is the cause of this issue?

A DHCP configured router is connected directly to a switch that has been provisioned with DHCP snooping. IP Source Guard with the ip verify source port-security command is configured under

Which option is the cause of the problem?

A switch is added into the production network to increase port capacity. A network engineer is configuring the switch for DHCP snooping and IP Source Guard, but is unable to

In which three ways does this command impact the traffic?

The command storm-control broadcast level 75 65 is configured under the switch port connected to the corporate mail server. In which three ways does this command impact the traffic? (Choose

Which option describes what causes the port to go into the errdisable state?

After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failed retries. The port then transitions into

After reviewing UDLD status on switch ports, an engineer notices that the current bidirectional state for an access port is “Unknown.” Which statement describes what this indicates about the status of the port?

After reviewing UDLD status on switch ports, an engineer notices that the current bidirectional state for an access port is “Unknown.” Which statement describes what this indicates about the status

Which spanning-tree technology is used to accomplish backup root port selection?

Pilot testing of the new switching infrastructure finds that when the root port is lost, STP immediately replaces the root port with an alternative root port. Which spanning-tree technology is

Which two elements are used to accomplish this?

A network engineer must adjust the STP interface attributes to influence root port selection. Which two elements are used to accomplish this? (Choose two.) A. port-priority B. cost C. forward-timers

Which action must be done to apply a new load balancing method?

A network engineer must set the load balance method on an existing port channel. Which action must be done to apply a new load balancing method? A. Configure the new

Which option must be enabled to allow for enhanced reporting mechanisms using Cisco Discovery Protocol?

While doing network discovery using Cisco Discovery Protocol, it is found that rapid error tracking is not currently enabled. Which option must be enabled to allow for enhanced reporting mechanisms

Which command accomplishes this task?

After port security is deployed throughout an enterprise campus, the network team has been overwhelmed with port reset requests. They decide to configure the network to automate the process of

Which two commands help trace this PC when the MAC address is known?

The network monitoring application alerts a network engineer of a client PC that is acting as a rogue DHCP server. Which two commands help trace this PC when the MAC

Which protocol does the network engineer configure on both devices to accomplish this?

A network engineer has just deployed a non-Cisco device in the network and wants to get information about it from a connected device. Cisco Discovery Protocol is not supported, so

Which option can be configured to accomplish this?

A manager tells the network engineer to permit only certain VLANs across a specific trunk interface. Which option can be configured to accomplish this? A. allowed VLAN list B. VTP

Which spanning-tree feature satisfies this requirement?

For client server failover purposes, the application server team has indicated that they must not have the standard 30 second delay before their switchport enters a forwarding state. For their

Which command does a network engineer use to verify the spanning-tree status for VLAN 10?

Which command does a network engineer use to verify the spanning-tree status for VLAN 10? A. switch# show spanning-tree vlan 10 B. switch# show spanning-tree bridge C. switch# show spanning-tree

Which statement describes what happens when a domain name is configured on one of the switches?

A new network that consists of several switches has been connected together via trunking interfaces. If all switches currently have the default VTP domain name “null”, which statement describes what

Which option decreases consumption of bandwidth used by broadcast traffic?

While troubleshooting a network outage, a network engineer discovered an unusually high level of broadcast traffic coming from one of the switch interfaces. Which option decreases consumption of bandwidth used

Which Spanning Tree Protocol should be used to reduce switch resources and managerial burdens that are associated with multiple spanning-tree instances?

A network engineer is setting up a new switched network. The network is expected to grow and add many new VLANs in the future. Which Spanning Tree Protocol should be

Which statement about the use of SDM templates in a Cisco switch is true?

Which statement about the use of SDM templates in a Cisco switch is true? A. SDM templates are used to configure system resources in the switch to optimize support for

Which SDM template disables routing and supports the maximum number of unicast MAC addresses?

Which SDM template disables routing and supports the maximum number of unicast MAC addresses? A. VLAN B. access C. default D. routing Answer: A

Which SDM template is the most appropriate for a Layer 2 switch that provides connectivity to a large number of clients?

Which SDM template is the most appropriate for a Layer 2 switch that provides connectivity to a large number of clients? A. VLAN B. default C. access D. routing Answer:

What is the default period of time after which a MAC address ages out and is discarded?

In a Cisco switch, what is the default period of time after which a MAC address ages out and is discarded? A. 100 seconds B. 180 seconds C. 300 seconds

When is a syslog message generated?

If a network engineer applies the command mac-address-table notification mac-move on a Cisco switch port, when is a syslog message generated?? A. A MAC address or host moves between different

Which option is a possible cause for an errdisabled interface?

Which option is a possible cause for an errdisabled interface? A. routing loop B. cable unplugged C. STP loop guard D. security violation Answer: D

What is the default value for the errdisable recovery interval in a Cisco switch?

What is the default value for the errdisable recovery interval in a Cisco switch? A. 30 seconds B. 100 seconds C. 300 seconds D. 600 seconds Answer: C

Which statement about LLDP-MED is true?

Which statement about LLDP-MED is true? A. LLDP-MED is an extension to LLDP that operates between endpoint devices and network devices. B. LLDP-MED is an extension to LLDP that operates

Which statement about Cisco devices learning about each other through Cisco Discovery Protocol is true?

Which statement about Cisco devices learning about each other through Cisco Discovery Protocol is true? A. Each device sends periodic advertisements to multicast address 01:00:0C:CC:CC:CC. B. Each device broadcasts periodic

Which option lists the information that is contained in a Cisco Discovery Protocol advertisement?

Which option lists the information that is contained in a Cisco Discovery Protocol advertisement? A. native VLAN IDs, port-duplex, hardware platform B. native VLAN IDs, port-duplex, memory errors C. native

Which option describes a limitation of LLDP?

Which option describes a limitation of LLDP? A. LLDP cannot provide information about VTP. B. LLDP does not support TLVs. C. LLDP can discover only Windows servers. D. LLDP can

Which statement about the UDLD protocol is true?

Which statement about the UDLD protocol is true? A. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.

Which option lists the modes that are available for configuring UDLD on a Cisco switch?

Which option lists the modes that are available for configuring UDLD on a Cisco switch? A. normal and aggressive B. active and aggressive C. normal and active D. normal and

What is the default interval at which Cisco devices send Cisco Discovery Protocol advertisements?

What is the default interval at which Cisco devices send Cisco Discovery Protocol advertisements? A. 30 seconds B. 60 seconds C. 120 seconds D. 300 seconds Answer: B

Which statement about Cisco Discovery Protocol configuration on a Cisco switch is true?

Which statement about Cisco Discovery Protocol configuration on a Cisco switch is true? A. CDP is enabled by default and can be disabled globally with the command no cdp run.

Which VTP mode is needed to configure an extended VLAN, when a switch is configured to use VTP versions 1 or 2?

Which VTP mode is needed to configure an extended VLAN, when a switch is configured to use VTP versions 1 or 2? A. transparent B. client C. server D. Extended

What is the size of the VLAN field inside an 802.1q frame?

What is the size of the VLAN field inside an 802.1q frame? A. 8-bit B. 12-bit C. 16-bit D. 32-bit Answer: B

What is the maximum number of VLANs that can be assigned to an access switchport without a voice VLAN?

What is the maximum number of VLANs that can be assigned to an access switchport without a voice VLAN? A. 0 B. 1 C. 2 D. 1024 Answer: B

Which feature is automatically enabled when a voice VLAN is configured, but not automatically disabled when a voice VLAN is removed?

Which feature is automatically enabled when a voice VLAN is configured, but not automatically disabled when a voice VLAN is removed? A. portfast B. port-security C. spanning tree D. storm