web analytics

Which two statements about IP SLA are true?

Which two statements about IP SLA are true? (Choose Two) A. Data can be collected with a physical probe B. statistics are collected and stored in the RIB C. They

Which change must you make to this configuration to enable the router to participate in DR election?

interface fastethernet 0/0 ip address 10.1.1.1 255.255.255.0 ip ospf authentication message-digest ip ospf network point-to-point ip ospf priority 2 ip ospf area 1 Refer to the exhibit. Which change must

What terminal line command can you enter to prevent a router from attempting a telnet connection in response to an in host name entry at the EXEC prompt?

What terminal line command can you enter to prevent a router from attempting a telnet connection in response to an in host name entry at the EXEC prompt? A. Logging

What is a reason for an EIGRP router to send an SIA reply to a peer?

What is a reason for an EIGRP router to send an SIA reply to a peer? A. To respond to an SIA query that the router is still waiting on

Which Cisco IOS XE component provides separation between the control plane and the data plane?

Which Cisco IOS XE component provides separation between the control plane and the data plane? A. POSIX B. Forwarding and Feature C. Free and Open Source software D. Common Management

Which two statements about root guard and loop guard are true?

Which two statements about root guard and loop guard are true? (Choose two) A. Loop guard uses its own keepalives to determine unidirectional traffic. B. Loop guard uses its own

Which two statements about VPLS are true?

Which two statements about VPLS are true? (Choose two) A. Split horizon is used on PE devices to prevent loops B. PE routers dynamically associate to peers C. VPLS extends

Which value does the router additionally check on an OSPF Type 3 LSA?

If running an OSPF process without the capability vrf-lite command in a VRF, which value does the router additionally check on an OSPF Type 3 LSA? A. the tag B.

Which two statements about 6PE are true?

Which two statements about 6PE are true? (Choose two) A. It does not require MPLS between the PE routers. B. It requires BGP to exchange labeled IPv6 unicast between PE

Which component does an IS-IS router construct its link-state database?

From which component does an IS-IS router construct its link-state database? A. LSAs B. Hello packets C. LSPs D. SPTs Correct Answer: C

Which two statements about the spanning-tree timers in a switched network are true?

Which two statements about the spanning-tree timers in a switched network are true? (Choose two) A. The root bridge sends out a configuration BPDU every hello interval B. The default

Which three protocols are permitted by IEEE 802.1x port-based authentication before the client is successfully authenticated by the RADIUS server?

Which three protocols are permitted by IEEE 802.1x port-based authentication before the client is successfully authenticated by the RADIUS server? A. EAPOL B. BOOTP C. STP D. CDP E. TCP

Which PHB type allows for the best interoperability with IP Precedence already used in the network?

Which PHB type allows for the best interoperability with IP Precedence already used in the network? A. Expedited Forwarding B. Assured Forwarding C. Class Selector D. Default Correct Answer: C

Which statement about NAT64 is true?

Which statement about NAT64 is true? A. NAT64 provides address family translation and translates IPv4 to IPv6 and IPv6 to IPv4 B. NAT64 provides address family translation and can translate

Which two statements about OSPF route filtering are true?

Which two statements about OSPF route filtering are true? (Choose two) A. It affects LSA flooding B. It can be based on the source router ID C. It can be

When the BGP additional-paths feature is used, what alows a BGP speaker to differentiate between the different available paths?

When the BGP additional-paths feature is used, what alows a BGP speaker to differentiate between the different available paths? A. The remote BGP peer prepends its own next-hop address to

How long will the root bridge continue to send configuration BPDUs to notify all bridges to age out their MAC address tables?

How long will the root bridge continue to send configuration BPDUs to notify all bridges to age out their MAC address tables? A. The max-age time B. The forward delay

When do summary black holes occur in eigrp?

When do summary black holes occur in eigrp? A. when a summary is created for security purposes to draw undesired traffic to a termination point B. when a summary is

What are two of the commands that you ccan enter to gracefully shut down OSPF and notify neighbors?

What are two of the commands that you ccan enter to gracefully shut down OSPF and notify neighbors? (CHoose two) A. router(config-router)#shutdown B. router(config-router)#graceful shutdown C. router(config)#ip notify D. router(config-if)#ip

Which three statements are functions that are performed by IKE phase 1?

Which three statements are functions that are performed by IKE phase 1? (Choose three) A. It builds a secure tunnel to negotiate IKE phase 1 parameters B. It establishes IPSec

Which two options are requirements for AToM support?

Which two options are requirements for AToM support? (Choose two) A. Cisco Express Forwarding must be disabled B. MPLS must be configured with an LSP in SP core C. MPLS

Which statement is true about PIM?

Which statement is true about PIM? A. PIM SM uses shared trees B. In Bidir-PIM, sources register to RP as in PM SM C. The PIM DM flood and prune

Which action can you take to allow a neighbour relationship to be established?

R1#show ip ospf interface FastEthernet0/0.12 …Network Type Non_BROADCAST… R2#show ip ospf interface FastEthernet0/0.12 …Network Type BROADCAST… Refer to the exhibit. OSPF is configured on R1 and R2 as shown. Which

Which two statements about this CoS mapping are true?

Refer to the exhibit. Which two statements about this CoS mapping are true? (Choose two) A. It maps the second queue and first threshold to CoS 3. B. It maps

Which two statements about VPLS are true?

Which two statements about VPLS are true? (choose two) A. The service provider provisions CE devices B. It enables CE devices to operate as part of an L3 VPN C.

Which two statements about NBAR classification are true?

Which two statements about NBAR classification are true? (Choose Two) A. It can classify IP packets B. It requires CEF to be enable on the router C. It is recommended

Which two statements about EIGRP load balancing are true?

Which two statements about EIGRP load balancing are true? (Choose Two) A. EIGRP supports unequal-cost paths by default B. EIGRP supports 6 unequal-cost paths C. Cisco Express Forwarding is required

Which two statements about the Cisco Express Forwarding glean adjacency type are true?

Which two statements about the Cisco Express Forwarding glean adjacency type are true? (Choose Two) A. the router FIB table maintains a prefix for the subnet instead of individual hosts.

Which option describes the purpose of the no ip next-hop-self eigrp configuration line in DMVPN deployment?

Which option describes the purpose of the no ip next-hop-self eigrp configuration line in DMVPN deployment? A. It preserves the original next hop value as learned by the spoke routers.

Which two statements about the Add path support in EIGRP feature are true ?

Which two statements about the Add path support in EIGRP feature are true ? (Choose two) A. The next-hop-self command should be disabled to prevent interference with the add-paths command

When is MAC authentication bypass enabled by default?

When is MAC authentication bypass enabled by default? A. When 802.1x authentication times out B. When 802.1x authentication fails C. When two-factor authentication is configured D. After 802.1x authentication verifies

Which two statements about IGPs are true?

Which two statements about IGPs are true? (Choose two) A. RIPv2 and OSPF are distance vector protocols B. OSPF and EIGRP have high resource usage C. IS-IS and EIGRP are

How can you configure the network devices so that the two networks work together seamlessly?

You have been asked to connect a remote network with different DSCP mappings to the primary network of your organization. How can you configure the network devices so that the

What will be the IP MTU of tunnel0?

interface GigabitEthernet0/0 ip address 10.10.10.1 255.255.255.0 duplex auto speed auto media-type RJ45 ! interface Tunnel0 ip address 192.168.1.1 255.255.255.252 tunnel source GigabitEthernet0/0 tunnel destination 192.168.1.240 Refer to the exhibit. What