web analytics

Where are domains placed when they are initially registered with Cisco UCS Central?

Where are domains placed when they are initially registered with Cisco UCS Central? A. acknowledged domains B. ungrouped domains C. registered domains D. discovered domains Correct Answer: B

Which routing protocol is Implemented between leaf and spine switches to propagate external routes within the ACI fabric?

Which routing protocol is Implemented between leaf and spine switches to propagate external routes within the ACI fabric? A. static routes B. Border Gateway Protocol C. Intermediate System–to-lntermediate System D.

Which three LSA types are valid forOSPFv2 ?

Which three LSA types are valid forOSPFv2 ? (Choose 3) A. Opaque LSA: an LSA used to extend OSPF. B. Default LSA: an LSA generated by the ASBR. These LSAs

Which two options are valid span confiuguration for a Cisco Nexus 1000 series Swithc?

Which two options are valid span confiuguration for a Cisco Nexus 1000 series Swithc? (Choose two) A. switch# configure terminal switch(config)# monitor session # ? switch(config-monitor)# source interface ethemet 2/1-3

Which two statements about dynamic port binding are true?

Which two statements about dynamic port binding are true? (Choose two.) A. The port is connected when the VM is powered on and disconnected when the VM is powered off.

Which three prerequisites must be created to enable Cisco UCS authentications via LDAP?

Which three prerequisites must be created to enable Cisco UCS authentications via LDAP? (Choose 3) A. LDAP provider group B. remotely authenticated user C. LDAP provider D. authentication domain E.

Which two server models support single-wire management for Cisco ucs C-Series integration with Cisco ucs Manager?

Which two server models support single-wire management for Cisco ucs C-Series integration with Cisco ucs Manager? (Choose two.) A. Cisco UCS C200 M2 server B. Cisco UCS C250 M2 server

Which two FEX connection modes are correct?

Which two FEX connection modes are correct? (Choose two.) A. hard-pinning mode B. soft-pinning mode C. port channel mode D. physical-pinning mode E. vlan pinning mode Correct Answer: AC

Which two items have an impact on the maximum number of virtual interfaces that can be created on a virtual interface card?

Which two items have an impact on the maximum number of virtual interfaces that can be created on a virtual interface card? (Choose two.) A. number of blades in the

What is the default MTU for Fibre Channel on Cisco UCS Manager?

What is the default MTU for Fibre Channel on Cisco UCS Manager? A. 2112 B. 2240 C. 2000 D. 9216 Correct Answer: B

Which four port types are included in the VLAN port count?

Which four port types are included in the VLAN port count? (Choose four.) A. border uplink Ethernet ports B. border uplink EtherChannel member ports C. FCoE ports in a SAN

Which feature must be enabled on the upstream Fibre Channel switch if the fabric interconnect is configured in end-host mode?

Which feature must be enabled on the upstream Fibre Channel switch if the fabric interconnect is configured in end-host mode? A. NPV B. NPIV C. Zoning D. Smart Zoning Correct

Which three commands are necessary to activate these suppression polices in Cisco UCS Manager?

Fault suppression allows you to suppress SNMP trap and Call Home notifications during a planned maintenance period. Which three commands are necessary to activate these suppression polices in Cisco UCS

How many traffic monitoring sessions can you create on Cisco UCS Manager?

How many traffic monitoring sessions can you create on Cisco UCS Manager? A. 16 B. 8 C. 24 D. 32 Correct Answer: A

What is the purpose of the management interface monitoring policy?

What is the purpose of the management interface monitoring policy? A. to monitor the management interface counters for errors and drops B. to prevent VM traffic from being black-holed during

What will be the result of applying the static UUID?

You are about to assign a static UUID to a service profile. This particular UUID is also defined within the range of a UUID pool. The duplicate UUID in the

Which three options are valid ACE probes?

Which three options are valid ACE probes? (Choose three.) A. HTTP B. Telnet C. Java scripting D. TCL scripting E. XML scripting F. SSH Correct Answer: ABD

When a new connection is made so that another connection with the same parameter will always reach the same server. Which load-balancing predictor does this statement describe?

A load balancer performs an operation on a predefined parameter, such as the IP address, HTTP cookie, or URL, when a new connection is made so that another connection with

Which option describes the default predictor on ACE to select the best server to fulfill a client request?

Which option describes the default predictor on ACE to select the best server to fulfill a client request? A. the hash cookie, which selects the server by using a hash

Which component receives the query and sends it to the location that knows the IP address for the destination?

In the basic DNS resolution process, which component receives the query and sends it to the location that knows the IP address for the destination? A. DNS resolver B. D-proxy

Which protocol message does the Cisco ACE module use to insert or withdraw all RHI routes?

Which protocol message does the Cisco ACE module use to insert or withdraw all RHI routes? A. ICMP B. SCP C. IPv4 D. SCTP Correct Answer: B

What are the three benefits of SSL offload?

What are the three benefits of SSL offload? (Choose three.) A. total offload of encryption from the servers B. partial offload of encryption from the servers C. Layer 5 to

When a switch that supports enhanced zoning joins a fabric, which SW ILS command does it use to determine the enhanced zoning capabilities of the other switches in the fabric?

When a switch that supports enhanced zoning joins a fabric, which SW ILS command does it use to determine the enhanced zoning capabilities of the other switches in the fabric?

What is the main fonction of the device-alias distribute command?

What is the main fonction of the device-alias distribute command? A. This command distributes the device alias configuration on the existing switch to all the other switches in the Cisco

Which two actions must occur to disable the LAN traffic on an FCoE link to a host?

Which two actions must occur to disable the LAN traffic on an FCoE link to a host? (Choose two.) A. interface Ethernet 1/1 shutdown Ian B. The switch sends a

Which statement about the iSCSI initiator task tag is true?

Which statement about the iSCSI initiator task tag is true? A. The initiator assigns a task tag to each task it issues. B. The target assigns a task tag on

Which three capabilities are supported in Cisco Nexus 5000 Series Switches?

In DCBX feature negotiation, the switch and CNA exchange capability information and configuration values. Which three capabilities are supported in Cisco Nexus 5000 Series Switches? (Choose three.) A. PFC B.

Which three management tools are available with DCNM-SAN Manager, Device Manager, and Performance Manager?

Which three management tools are available with DCNM-SAN Manager, Device Manager, and Performance Manager? (Choose three.) A. Cisco Traffic Analyzer B. Cisco Protocol Analyzer C. Cisco Port Analyzer Adapter 2

Which statement about applying this change is true?

You plan to add a new VLAN to your updating service profile template. Assuming that the default maintenance policy is configured, which statement about applying this change is true? A.

How many licenses are provided with the purchase of the Cisco UCS 6296 fabric interconnect?

How many licenses are provided with the purchase of the Cisco UCS 6296 fabric interconnect? A. 18 B. 16 C. 12 D. 8 Correct Answer: A

How are unified port expansion modules for Cisco UCS 6200 Series Fabric Interconnects licensed?

How are unified port expansion modules for Cisco UCS 6200 Series Fabric Interconnects licensed? A. All ports are fully licensed by default. B. The first eight ports on the module

Which programming language is used to write custom workflow code in Cisco UCS Director?

Which programming language is used to write custom workflow code in Cisco UCS Director? A. Python B. Bash script C. Java script D. Java Correct Answer: C

Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled?

Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled? A. Cisco AV-pair B. TACACS+ or RADIUS ack frame role attribute C.

Which option require by atomic counter to be leveraged in troubleshooting endpoint connectivity?

Which option require by atomic counter to be leveraged in troubleshooting endpoint connectivity? A. Endpoint must be in different bridge domain B. Endpoint must connect to different leaf switch C.

Which language is used to write Cloupia Script?

Which language is used to write Cloupia Script? A. Python B. UCS director macro language C. JAVA D. Javascript Correct Answer: D

Which two statements about VACLs on Cisco Nexus 7000 Series Switches are true?

Which two statements about VACLs on Cisco Nexus 7000 Series Switches are true? (Choose two.) A. A single VACL can be shared across two or more VDCs. B. Use of

Which option must the network adapters support to enable iSCSI boot?

In a Cisco USC B-Series environment, which option must the network adapters support to enable iSCSI boot? A. vNIC B. CIMC C. iBFT D. UEFI E. MPIO Correct Answer: C

Which option lists valid configuration commands to help Identify packet flow for ingress and egress IP packets and provide statistics based on packet flow when configuring a Cisco Nexus Device via the CLI?

Which option lists valid configuration commands to help Identify packet flow for ingress and egress IP packets and provide statistics based on packet flow when configuring a Cisco Nexus Device

Which description of what happens after initial setup to activate these interlinks is true?

You are setting up an ACI spine-leaf architecture and interconnecting the spine switches with the leaf switches. Which description of what happens after initial setup to activate these interlinks is

Where is a typical request in the Cisco UCS XML API placed in the data management engine, and, after the request is confirmed, what is updated?

Where is a typical request in the Cisco UCS XML API placed in the data management engine, and, after the request is confirmed, what is updated? A. The request is

Which two statements about UCS switch mode are true?

Which two statements about UCS switch mode are true? A. Disjoint Layer 2 networks are supported only when the Ethernet switching mode of the fabric interconnects is configured for switch

Which option must be configured to permit the packets between these two EPGs, assuming the subnet is already being advertised correctly?

You are configuring an ACI Fabric with Layer 3 out connectivity. You want to allow traffic to transverse from one external EPG to another external EPG, or alternatively to another

Which approach is recommended in Cisco NX-OS to generate the BGP route distinguisher and route target?

In Multiple vendor environment, which approach is recommended in Cisco NX-OS to generate the BGP route distinguisher and route target? A. Manually configure route distinguisher and auto generate route-target values.

Which authentication protocols does Cisco NX-OS Software use for SNMPv3?

SNMPv3 authorizes management operations only by configured users and encrypts SNMP messages. Which authentication protocols does Cisco NX-OS Software use for SNMPv3? (Choose two.) A. NMAC-SHA-96 authentication protocol B. HMAC-MD5-96

Which three parameters to select the root?

In the Cisco FabricPath domain, one switch becomes the root for the multidestination tree. Cisco FabricPath switches compares which three parameters to select the root? (Choose three.) A. Root priority

What statement about network ports in a UCS fabric interconnect is true?

What statement about network ports in a UCS fabric interconnect is true? A. Network ports do not trunk any vlans unless they are overriden in the vlan manager. B. network

Which process bring the replacement fabric interconnect into the cluster?

An Administrator is replacing a fabric interconnect. The failed fabric interconnect was Fl-A and was master at same time of failure. Which process bring the replacement fabric interconnect into the

Which two guideline and limitations of PTP on Cisco NX-OS are true?

Which two guideline and limitations of PTP on Cisco NX-OS are true? (Choose two.) A. PTP supports multicast, unicast, and anycast communication. B. PTP is limitless per network C. PTP

When the administrator users the commit command to activate the changes to the call home configuration, it results in an error. Which is true?

When the administrator users the commit command to activate the changes to the call home configuration, it results in an error. Which is true? A. CSF must be disabled for

How is the Layer 3 Configuration applied?

A vPC stretched from two leaf switches up to an ASA Firewall. You are configuring the VPC as an L30UT interface in an Cisco ACI Fabric. How is the Layer